LR007474HD Metal Oil Sump & Filter Kit
Fitting this pan means you do not have to remove the cross member for access, simply drain your old sump, undo the bolts, lower and then either cut through the plastic filter spigot (allows oil upwards) or snap it off.
The new filter pushes into place and you can slide the new pan and gasket in.
We recommend use of a very small amount of non hardening gasket jointing on the gasket and on the bolt threads, do not over tighten the bolts as this causes leaks.
We also recommend inspection of the mechatronic seal (look up to where the wiring goes into the transmission, if it shows any sign of leaking replace it whilst apart as it is clipped on from the inside.
Kit contains:
- Replacement Metal Pan (This pan has drain plugs in it - many others do not!)
- Filter
- Bolt Kit
- Gasket
